Transfer Electric Motor Powered

Graded Augers) can be used for grain, sunflower, beans, etc. Loading and unloading operations of pulses products are also used for granular materials (plastic raw materials, cement, etc.) products with a geared motor. Stepped augers are preferred for long distance and higher loading. It takes motion from the electric motor by means of a belt pulley. There are 2 main types according to the stepped auger capacity and loading height. It is manufactured in 2 models with a pipe diameter of 168-192 mm according to its capacity. It is manufactured in 2 models as 15 -17 meters according to the loading height. The loading height can be adjusted with the pulley rope system.

Description

Technical Dimensions AT-CG 6015 AT-CG 6017 AT-CG 7015 AT-CG 7017
Pipe Diameter (inch-mm) 6” – 168 6” – 168 7”-192 7”-192
Total Length (mm) 15200 17200 15200 17200
Total Width (mm) 1800 1800 1800 1800
Max. Loading Height (mm) 5500 6000 5500 6000
Min. Loading Height (mm) 3250 3750 3250 3750
Capacity (Wheat) (T/h) 25-30 25-30 45-50 45-50
Total Weight (kg) 480 580 620 700
Working Cycle (d/d) 600 600 600 600
Required Motor Power and Phase (hp – V) 7.5 – 380V 10 – 380V 10 – 380V 10 – 380V